Aircraft mechanics typically do the following:
- Diagnose mechanical or electrical problems
- Repair wings, brakes, electrical systems, and other aircraft components
- Replace defective parts, using hand tools or power tools
- Examine replacement aircraft parts for defects
- Read maintenance manuals to identify repair procedures
- Test aircraft parts with gauges and other diagnostic equipment
- Inspect completed work to ensure that it meets performance standards
- Keep records of maintenance and repair work
Avionics technicians typically do the following:
- Test electronic instruments, using circuit testers, oscilloscopes, and voltmeters
- Interpret flight test data to diagnose malfunctions and performance problems
- Assemble components, such as electrical controls and junction boxes, and install software
- Install instrument panels, using hand tools, power tools, and soldering irons
- Repair or replace malfunctioning components
- Keep records of maintenance and repair work
Airplanes require reliable parts and maintenance in order to fly safely. To keep an airplane in operating condition, aircraft and avionics equipment mechanics and technicians perform scheduled maintenance, make repairs, and complete inspections. They must follow detailed regulations set by the Federal Aviation Administration (FAA) that dictate maintenance schedules for different operations.
Many mechanics are generalists and work on many different types of aircraft, such as jets, piston-driven airplanes, and helicopters. Others specialize in one section, such as the engine, hydraulic system, or electrical system, of a particular type of aircraft. In independent repair shops, mechanics usually inspect and repair many types of aircraft.
The following are examples of types of aircraft and avionics equipment mechanics and technicians:
Airframe and Powerplant (A&P) mechanics are certified generalist mechanics who can independently perform many maintenance and alteration tasks on aircraft. A&P mechanics repair and maintain most parts of an aircraft, including the engines, landing gear, brakes, and air-conditioning system. Some specialized activities require additional experience and certification.
Maintenance schedules for aircraft may be based on hours flown, days since the last inspection, trips flown, or a combination of these factors. Maintenance also may need to be done at other times to address specific issues recognized by mechanics or manufacturers.
Mechanics use precision instruments to measure wear and identify defects. They may use x rays or magnetic or ultrasonic inspection equipment to discover cracks that cannot be seen on a plane’s exterior. They check for corrosion, distortion, and cracks in the aircraft’s main body, wings, and tail. They then repair the metal, fabric, wood, or composite materials that make up the airframe and skin.
After completing all repairs, mechanics test the equipment to ensure that it works properly and record all maintenance completed on an aircraft.
Avionics technicians are specialists who repair and maintain a plane’s electronic instruments, such as radio communication devices and equipment, radar systems, and navigation aids. As the use of digital technology increases, more time is spent maintaining computer systems. The ability to repair and maintain many avionics and flight instrument systems is granted through the Airframe rating, but other licenses or certifications may be needed as well.
Designated airworthiness representatives (DARs) examine, inspect, and test aircraft for airworthiness. They issue airworthiness certificates, which aircraft must have to fly. There are two types of DARs: manufacturing DARs and maintenance DARs.
Inspection authorized (IA) mechanics are mechanics who have both Airframe and Powerplant certification and may perform inspections on aircraft and return them to service. IA mechanics are able to do a wider variety of maintenance activities and alterations than any other type of maintenance personnel. They can do comprehensive annual inspections or return aircraft to service after a major repair.
Repairmen certificate holders may or may not have the A&P certificate or other certificates. Repairmen certificates are issued by certified repair stations to aviation maintenance personnel, and the certificates allow them to do specific duties. Repairmen certificates are valid only while the mechanic works at the issuing repair center and are not transferable to other employers.
- Time Pressure (92%)
- Exposed to Contaminants (60%)
- Consequence of Error (60%)
- Hazardous Conditions (56%)
- Minor Burns, Cuts, Bites (47%)
- Responsible for Others' Health (47%)
- Hazardous Equipment (42%)
- High Conflict Frequency (41%)
- High Places (33%)
Aircraft mechanics and service technicians typically enter the occupation after attending a Part 147 FAA-approved aviation maintenance technician school. These schools award a certificate of completion that the FAA recognizes as an alternative to the experience requirements stated in regulations. The schools also grant holders the right to take the relevant FAA exams.
Avionics technicians typically earn an associate’s degree before entering the occupation. Aircraft controls, systems, and flight instruments have become increasingly digital and computerized. Workers who have the proper background in aviation flight instruments or computer repair are needed to maintain these complex systems
The FAA requires that aircraft maintenance be done either by a certified mechanic with the appropriate ratings or authorizations or under the supervision of such a mechanic.
The FAA offers separate certifications for bodywork (Airframe mechanics, or “A”) and engine work (Powerplant mechanics, or “P”), but employers may prefer to hire mechanics who have both Airframe and Powerplant (A&P) ratings. The A&P ratings generally certify that aviation mechanics meet basic knowledge and ability standards.
Mechanics must be at least 18 years of age, be fluent in English, and have 30 months of experience to qualify for either the A or the P rating or both (the A&P rating). Completion of a program at a Part 147 FAA-approved aviation maintenance technician school can substitute for the experience requirement and shorten the time requirements for becoming eligible to take the FAA exams.
Applicants must pass written, oral, and practical exams that demonstrate the required skills within a timeframe of 2 years.
To keep their certification, mechanics must have completed relevant repair or maintenance work within the previous 24 months. To fulfill this requirement, mechanics may take classes from their employer, a school, or an aircraft manufacturer.
The Inspection Authorization (IA) is available to mechanics who have had their A&P ratings for at least 3 years and meet other requirements. These mechanics are able to review and approve many major repairs and alterations.
Avionics technicians typically are certified through a repair station for the specific work they perform on aircraft, or they hold the Airframe rating to work on an aircraft’s electronic and flight instrument systems. An Aircraft Electronics Technician (AET) certification is available through the National Center for Aerospace & Transportation Technologies (NCATT). It certifies that aviation mechanics have a basic level of knowledge in the subject area, but it is not required by the FAA for any specific tasks. Avionics technicians who work on communications equipment may need to have the proper radiotelephone operator certification issued by the Federal Communications Commission (FCC).
- In-state comparisons: the ratio of median (middle) salaries for avionics technicians compared to the median salary for all people working in each state, or
- Median salary: the unaltered median salaries for avionics technicians.
